Portable Waste Stripper Stripping waste stripper machine

　　Please note the following when using electric and pneumatic scrap strippers: When operating the electric scrap stripper, you should operate it with both hands to ensure that the plug and working environment are clean; you need to take a 1-minute break every 30 minutes of work to ensure good heat dissipation.

　　Lubricate chains and gears before working every day, and clean the surface of the machine to ensure that no paper debris blocks the suction and exhaust ports.

　　The pneumatic waste stripper needs to ensure that the air pressure reaches 0.8KPA, and the length of the trachea is preferably within 6 meters to reduce air pressure loss. Maintain the cutter regularly, add air tool oil to prevent rust, and drain water regularly to avoid water entering the machine. Clean up paper scraps before the end of each day¨s work to ensure that the air vents are clear.