How to use and precautions for membrane switches and membrane panels

　　Home > News > Company NewsCompany NewsIn view of the actual needs of society, touch panel We need to change some original problems to better serve the society and benefit people. https://singway-touch.com/

　　Company NewsIndustry NewsHow to use and precautions for membrane switches and membrane panels2024-07-09689Guide to Using Membrane Switches and Panels: Tips and PrecautionsHow to use:

　　1. Clean the surface where the membrane switch needs to be attached (the surface to be attached must be flat, rust-free, oil-free, and dust-free);

　　2. Compare the size (put the membrane switch where it is to be attached and compare whether the size and position are just right);

　　3. Peel off the centrifugal paper at the bottom of the membrane switch from the edge by about 10mm;

　　4. Then put the membrane switch in the corresponding position and stick it partly, then slowly tear off the remaining centrifugal paper (without exceeding an angle of 15 degrees), and then stick it to the corresponding position in turn.

　　5. If the membrane switch with the centrifugal paper on the reverse side torn off during the pasting process needs to be placed first, the reverse side should be placed upward to prevent it from sticking to other objects and affecting the pasting;

　　using membrane switches

　　Notes:

　　1. Do not repeat the pasting operation and it must be completed in one go;

　　2. The tearing angle cannot exceed 15 degrees;

　　3. When trying to press the feel, be sure to place it flat on the table before pressing, and do not hold it in your hand and press it, otherwise it will affect the service life of the membrane switch.